Quick Start Guide
W Derek Chappell Jr.
Last Update 2 months ago
1. Power up your camera and plug in into your network.
There are 2 options for powering your camera.
A. Use a POE Injector (Recommended) (Tip: For multiple cameras, use a POE Switch)
B. Run a network cable from your router or network switch to your camera.
Then using a 12v DC power supply (at least .6 amps), run power wire from the power supply to the camera
2. Open the Camera or NVR in your browser\
3. Use username and password as given by your technician during installation.